一区二区三区视频_木工油氣潤滑和油霧潤滑的不同點！_新聞資訊_新聞中心_保麗龍雕刻機_五軸_四軸

聯系我們

18560023440

王經理：18560023440
地址：山東省德州市齊河縣經濟開發區齊眾大道7號-2車間

新聞資訊

木工油氣潤滑和油霧潤滑的不同點！

來源：http://www.bnuj.com.cn 時間：2019-06-10

木工油氣潤滑和油霧潤滑的不同點:

　　The difference between oil-air lubrication and oil mist lubrication in woodworking centers:

　　1、在木工加工，使用油脂和潤滑油循環潤滑會(huì )產生異常發熱部位。

　　1. In woodworking processing centers, the use of grease and lubricant circulation lubrication will produce abnormal heating parts.

　　2、像主軸一樣，需要高度清潔、封閉部件的高速軸承。

　　2. Like the spindle, high-speed bearings with highly clean and closed components are required.

　　木工潤滑系統的特點

　　Characteristics of Lubrication System in Woodworking Center

　　1、，無污染。因為沒有石油和霧，周?chē)沫h(huán)境沒有受到污染

　　1. Environmental protection, no pollution. Because there is no oil and fog, the surrounding environment is not polluted.

　　2. 準確的石油供應。通過增加調節閥，油可根據不同需要輸送到主軸、絲杠等潤滑點;

　　2. Accurate oil supply. By adding a regulating valve, oil can be transported to lubrication points such as spindle and screw according to different needs.

　　3、不存在高粘度潤滑油霧化問題;

　　3. There is no atomization problem of high viscosity lubricating oil.

　　4. 自動檢測和監控?？蓹z測潤滑油是否正常，如潤滑不佳，可報警停機，避免設備運行異常。

　　4. Automatic detection and monitoring. It can detect whether the lubricating oil is normal or not. If the lubrication is not good, it can alarm the shutdown and avoid abnormal operation of the equipment.

　　特別是對滾動軸承的主軸，采用適當的風冷效果，可以降低軸承的工作溫度，從而延長主軸的使用壽命

　　Especially for the spindle of rolling bearing, proper air cooling effect can reduce the working temperature of the bearing and prolong the service life of the spindle.